background image

PNOZ X10.1

Operating Manual PNOZ X10.1
20005-EN-10

| 20

Mechanical data

774746

774749

Weight

730 g

550 g

Where standards are undated, the 2020-07 latest editions shall apply.

Safety characteristic data

NOTICE

You must comply with the safety characteristic data in order to achieve the
required safety level for your plant/machine.

Operating
mode

EN ISO
13849-1:
2015

PL

EN ISO
13849-1:
2015

Category

EN 62061

SIL CL

EN 62061

PFH

D

 [1/h]

IEC 61511

SIL

IEC 61511

PFD

EN ISO
13849-1:
2015

T

M

 [year]

PL e

Cat. 4

SIL CL 3

2,31E-09

SIL 3

2,03E-06

20

Explanatory notes for the safety-related characteristic data:

}

The SIL CL value in accordance with EN 62061 corresponds to the SIL value in accord-
ance with EN 61508.

}

T

M

 is the maximum mission time in accordance with EN ISO 13849-1. The value also ap-

plies as the retest interval in accordance with EN 61508-6 and IEC 61511 and as the
proof test interval and mission time in accordance with EN 62061.

All the units used within a safety function must be considered when calculating the safety
characteristic data.

INFORMATION

A safety function's SIL/PL values are 

not

 identical to the SIL/PL values of

the units that are used and may be different. We recommend that you use
the PAScal software tool to calculate the safety function's SIL/PL values.

Summary of Contents for 774746
























Reviews: