Pilz 632080, Operating Manual, Page: 6 / 66

PSEN opII4F Series
Operating Manual PSEN opII4F Series
1003502-EN-09
| 6
INFORMATION
This gives advice on applications and provides information on special fea-
tures.
Overview
Safety light curtains of the PSEN opII4F Series are electrosensitive protective equipment
(ESPE type: 4) in accordance with DIN EN 61496-1 and DIN EN 61496-2 (AOPD) for work-
spaces in which machines, robots, and automated systems might pose a physical danger to
their operators.
Unit features
}
Resolution: 14 mm
}
Infrared protected field is generated
}
LED indicator for status information
}
Optical synchronisation of transmitters and receivers
}
Beam coding A and B for greater insensitivity (see Installing several safety light curtains
in parallel [ 22] )
– to stray light and short-term interruptions of the protected field
– to mutual interference when using two safety light curtains with the same alignment
}
Connection to evaluation devices
– PDP67 ION and PDP67 ION HP: 5-pin M12 two-sided connector (see Order refer-
ence for accessories, connection to PDP67 [ 59] )
– all other suitable evaluation devices (see System connection [ 34] ): 5-pin M12
one-sided connector and open cable end connection to clamping sleeves (see Order
reference for accessories, connection to other evaluation devices [ 60] )
}
Aluminium alloy housing
}
Die-cast zinc end caps
}
Shock resistance
– Bracket Swivel-Mount: 10g
– Bracket Adv Bracket Kit: 50g
}
Front panel of PC
}
Standard installation kit with flexible bracket (swivel mount) (included in delivery) to hold
the transmitter/receiver
– For standard application
– Transmitter/receiver remains rotatable for proper orientation
}
Dead-zone-free safety light curtain installation [ 24] with the
PSEN opII Adv Bracket Kit (available as an accessory [ 58] ) as a bracket for a trans-
mitter/receiver
– Dead-zone-free on both sides for protected field height of 300 mm or more