PSEN opII4H Series
Operating Manual PSEN opII4H Series
1003501-EN-08
| 31
Orientation
General guidelines
For the safety light curtain
to function properly, the transmitter and receiver must be aligned
correctly.
The safety light curtains transmitter and receiver can be oriented with or without a laser ori-
entation aid.
}
Orientation with a laser orientation aid: the safety light curtain need not be switched on
}
Orientation without a laser orientation aid: the safety light curtain must already be wired
(see chapter entitled "Wiring" in the safety curtain’s operating manual) and must be
switched on
For alignment Pilz recommends the PSEN opII Laserpointer (see
) or another laser alignment aid.
[3]
[1]
[2]
Fig.: Transmitter/receiver modification directions during orientation
Legend
[1] Vertical: by vertical shifting of position in the elongated holes in the top and bottom
flexible brackets
[2] Horizontal: by moving up and down in the slots in a horizontal direction
[3] The axis orientation can be changed by rotating the flexible bracket right or left
Pilz recommends that modifications to the orientation of the transmitter/receiver be made in
the following sequence:
1. Vertical modification
2. Horizontal modification
3. Axis orientation modification