Pilz 542 113, Operating Manual, Page: 20 / 29

PSEN cs6.11n
Operating Manual PSEN cs6.11n
1004127-EN-03
20
Normal mode
LED status Switch status
Device
green
Ready for operation
Safety gate
yel-
low
Actuator is within the response range
Off
Actuator is outside the response range
Input
yel-
low
The unit is ready for operation
LED display actuator teach-in
LED status
Switch status Remedy / measure Device Safety Gate Input
Green yellow
Display not
definitive Teaching actuator.
Duration approx. 20
seconds
-
Green
yellow
Display not
definitive Actuator teach-in com-
plete. Switch voltage off
and then on again.
Error display
LED status
Switch status Remedy / measure Device Safety Gate Input
red
Off Off
Internal error on
switch Change the switch.
red yellow yellow
Supply voltage is
outside the toler-
ance range Ensure the voltage supply
corresponds to the
Tech-
nical details [ 23] .
yellow
Display not
definitive Display not
definitive Supply voltage is at
the limit of the toler-
ance range Ensure the voltage supply
corresponds to the
Tech-
nical details [ 23] .
red
Display of
last status Display of
last status Outputs in fault con-
dition Check the outputs and
switch the voltage off and
then on again.
green yellow
Display not
definitive Wrong actuator Use the actuator PSEN
cs6.11 M12.