Safety
Operating Manual PSSu E F 2DI 60-R
1002506-EN-04
10
3
Safety
3.1
Intended use
The module may be used for failsafe applications in system environment B (automation
system PSS 4000).
The module meets the requirements of EN IEC 61508 up to SIL 3.
The failsafe inputs are not classified in accordance with the standard IEC 61131-2.
The module PSSu E F 2DI 60-R-R is suitable for use where there are increased environ-
mental requirements demanded by railway applications (see Technical details).
Intended use includes making the electrical installation EMC-compliant. Please refer to the
guidelines stated in the "PSSuniversal Installation Manual". The module is designed for use
in an industrial environment. It is not suitable for use in a domestic environment, as this can
lead to interference.
The following is deemed improper use in particular:
}
Any component, technical or electrical modification to the module
}
Use of the module outside the areas described in this manual
}
Any use of the module that is not in accordance with the technical details.
INFORMATION
The module is supported by PAS4000 from version 1.5.0. We recommend
that you always use the latest version (download from www.pilz.com).
The PSSu E F 2DI 60-R module may be used in conjunction with the following base mod-
ules:
}
PSSu BP 1/8 S-T
}
PSSu BP 1/8 C-T
}
PSSu BP 1/12 S-T
}
PSSu BP 1/12 C-T
}
PSSu BP-C1 1/12 S-T
}
PSSu BP-C1 1/12 C-T
3.2
Safety regulations
3.2.1
Use of qualified personnel
The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by competent persons.
A competent person is a qualified and knowledgeable person who, because of their train-
ing, experience and current professional activity, has the specialist knowledge required. To
be able to inspect, assess and operate devices, systems and machines, the person has to
be informed of the state of the art and the applicable national, European and international
laws, directives and standards.
