Safety
Operating Manual PSSu E S 2DO 2(-T)
21352-EN-07
| 10
3
Safety
3.1
Intended use
The module may be used for standard applications in system environment A and B.
The module provides type 1 outputs in accordance with IEC 61131-2. It may be used to
switch:
}
Resistive loads
}
Inductive loads
}
Capacitive loads
The module PSSu E S 2DO 2-T is suitable for use where there are increased environ-
mental requirements (see Technical Details).
Intended use includes making the electrical installation EMC-compliant. Please refer to the
guidelines stated in the "PSSuniversal Installation Manual". The module is designed for use
in an industrial environment. It is not suitable for use in a domestic environment, as this can
lead to interference.
The following is deemed improper use in particular:
}
Any component, technical or electrical modification to the module
}
Use of the module outside the areas described in this manual
}
Any use of the module that is not in accordance with the technical details.
INFORMATION
The module is supported by
}
PSSuniversal Configurator and PSSuniversal Assistant from Version 1.4.0
}
PAS4000 from Version 1.0.0
– We recommend that you always use the latest version (download
from www.pilz.com).
The PSSu E S 2DO 2 module may be used in conjunction with the following base modules:
}
PSSu BP 1/8 S
}
PSSu BP 1/8 C
}
PSSu BP-C 1/8 S
}
PSSu BP-C 1/8 C
}
PSSu BP 1/12 S
}
PSSu BP 1/12 C
}
PSSu BP-C1 1/12 S
}
PSSu BP-C1 1/12 C
