BT-Link Controls
Getting Started
Volume Controls:
Power Status/Button:
Bluetooth Status/Button:
Aux Input:
Audio Priority Switch:
USB type C Input:
Install batteries
You can independently adjust the volume for each ear
from your BT-Link.
Press and hold for one second to turn ON or OFF BT-
Link. LED indicates the power source and its status.
Press and hold for one second to turn ON or
OFF the Bluetooth. LED indicates the Bluetooth status. Additional phone
functions are available.
Use the provided 3.5 mm cable to connect to your audio source
without Bluetooth. When put the 3.5mm plug into the jack, there is a voice “line
in mode”, when set to line in mode, the bluetooth volume control also can
control the line in device volume
Controls how Aux audio and transmissions are
prioritized. Bluetooth Volume or next/previous song: Adjust your Bluetooth
device volume, or switch to next/previous songs
Power your BT-Link via USB instead of through batteries.
Press on the battery box lid where indicated and slide the lid off. Insert two
AA batteries ensuring that the polarity is as shown. Slide the battery box lid
back on and you are ready to go.
BT-Link
Aviation Headset BLUETOOTH Adapter
Operating Instructions
Powering On
Pairing
Pairing with 2nd device
Bluetooth Volume or next/previous song Control
Bluetooth Phone Functions
Headset Volume
Audio Priority Modes
To turn on, press the Power On button for more than
1 second and then let go.You will hear a voice say
“Power On”. If Power Button is pressed for more
than 3 seconds BT-Link will turn on and then off.
Bluetooth
To turn on Bluetooth press the Power Button for
more than 1 second and then let go. You will hear a
voice say “Power On”. If Power Button is pressed for
more than 3 seconds BT-Link will turn on and then off.
To turn off Bluetooth press the Power Button for
1 second and you will hear a voice say “Power OFF”.
When you turn on Bluetooth the BT-Link will begin searching for a device
to pair with. Look for the Bluetooth name “BT-Link”. If prompted for a
code, enter 0000.
To pair with a second device you must first disable the bluetooth function
of the first device. Now pair your second device and enable bluetooth
function of your first device. You should now have two devices paired.
On the side of BT-Link
Long press +/>| or -/|< to increase or decrease Bluetooth
volume. When you reach the Max or Min volume there is
a “DiDi” sound.
Short press +/>| or -/<| to switch to next/previous song.
Press once to pick up a call
Press once to hang up a call
Press for more than 1 second to decline a call
Press twice quickly to redial the last call
To adjust headset volume use the slide switches on front of
your BT-Link.
Use the Audio Priority switch to mute your auxiliary audio
input when you are sending or receiving radio transmissions.
AUTO: With incoming transmissions, Bluetooth and Aux are
muted and resume when transmission ends.
MIX: Aux and Bluetooth continue to play with transmissions.
OFF: Only transmissions are heard, Bluetooth and Aux are muted.
When set to Off Mode, in order to save battery power, the bluetooth is
POWERED OFF. When next switched to AUTO or MIX the bluetooth is
powered on again and will connect to your bluetooth devices in seconds.
Volume Control Power Status
Aux Input
Audio Priority Switch
Bluetooth Status
Bluetooth Volume
USB Input
