Prepare the Racks
To create a bay of Pillar racks, first remove the adjacent (inner) side panels from
each rack (see the following figure) and move the racks into position. You will
route the cables directly from one rack to the other through the open sides of the
racks because the cables are not long enough to route through a raised floor.
Figure 2 Sample 42U side panels
Legend
1 Side panel, one on each side
2 Latches
1 If locked, unlock the side panel using the supplied keys.
2 Unlatch the side panel by:
● Pushing the release button, or
● Lifting the release handles.
3 Remove the side panel and set it aside.
Chapter 2 Set Up the Rack
Rack Position
29
