2.5
Rear De-ice Pipeline Connection
2.5.1
Put the outboard end of the bonding strap Figure 5 [12] and the flap drive support angle Figure 3 [4] in
position and install the bolt Figure 5 [11] and nut Figure 5 [13].
2.5.2
Remove the caps and connect the two rear de-ice pipes Figure 5 [2]. Tighten the two clamps
Figure 5 [1].
2.5.3
Remove the caps and install the de-ice pipe Figure 5 [3] between the elbow connection Figure 5 [4]
and the fuselage connection.
2.5.4
Connect the two de-ice pipes Figure 5 [5] and Figure 5 [6] that go across below the fuselage.
2.5.5
Remove the caps and install the de-ice pipe Figure 5 [8] to the cross connector Figure 5 [9].
2.5.6
Install the screw Figure 5 [7] through the clip and distance bush Figure 5 [10].
PC-12/47E AMM Doc No 02300, ISSUE 01 REVISION 26 MSN 545, 1001-1719,
1721-1999
12-B-AM-00-00-00-I
UNCLASSIFIED
Effectivity: All
12-B-57-00-00-00B-720A-A
UNCLASSIFIED
2021-12-04 Page 14
