2.4
Equipment Connection at the Wing Bottom Center
2.4.1
Put the ends of the bonding straps Figure 4 [9] and the flap drive shaft support angle Figure 3 [10] in
position and install the bolt Figure 4 [10] and nut Figure 4 [11].
2.4.2
Remove the caps and install the brake pipe Figure 4 [8] between the fuselage and the wing.
2.4.3
Remove the caps and install the grommet Figure 4 [4] and the three fuel pipes Figure 4 [1],
Figure 4 [2] and Figure 4 [3] between the fuselage and the connections in the landing gear
compartment.
2.4.4
Remove the caps and connect the two rear de-ice pipes Figure 4 [12]. Tighten the two clamps
Figure 4 [13].
PC-12/47E AMM Doc No 02300, ISSUE 01 REVISION 26 MSN 545, 1001-1719,
1721-1999
12-B-AM-00-00-00-I
UNCLASSIFIED
Effectivity: All
12-B-57-00-00-00A-720A-A
UNCLASSIFIED
2021-12-04 Page 12
