7
CEO: Dr. Bernt Götz • Phone +493641/66880 • Fax +493641/668866 • www.piezosystem.com
6.4 Maintenance and inspection
CAUTION!
•
Before cleaning the exterior box of the voltage amplifier, turn off the power switch and unplug
the power plug. Failure to do so may result in a fire or electrical shock.
•
Clean the exterior box using a damp cloth that has been firmly wrung-out. Do not use alcohols,
benzene, paint thinner or other inflammable substances. If flammable substances come into
contact with an electrical component inside the voltage amplifier, this may result in a fire or
electrical shock.
6.5 Environmental conditions
The amplifier can be used:
•
indoors only
•
at an altitude of up to 2000 m
•
at a temperature between: 5 ... 35 °C
•
at a relative humidity between: 5 ... 95 % (non-condensing)
The recommended environmental conditions:
•
indoors only
•
at an altitude of up to 2000 m
•
at a temperature between: 20 ... 22 °C
•
at a relative humidity between: 5 ... 80 % (non-condensing)
7 Instructions for checking the function of the system / quick start
When you open the package, please check to make sure all the necessary parts are included (see
packing list) and nothing is damaged. Check the electronics and the actuator for any visible damage:
•
The top and bottom plates of the actuator (if it does not have another shape) should be parallel
each to each other and not have any scratches.
•
If there is any damage to the system, please contact our local representative immediately!
•
If the packaging material is damaged, please confirm this with the shipping company.
•
Connect the piezo actuator by using the D-SUB 15pin connector. Be sure the cables are
connected properly to the electronics.
•
Connect the device to PC with an USB cable.
•
Connect the power supply (24 VDC)
•
Normally, the PC installs necessary drivers automatically
•
After initialization, the LED lights green (open loop mode) or orange (closed loop mode)
•
In case of irregularities, please read the chapter on troubleshooting.
•
The function check is complete.
