PD200 V6 Manual
11
Rev 1.2, Released, 05-02-2018
11
Front Panel
Control
Type
Function
Power
Power On/Off
Offset
Adds a DC offset to the input signal
Input
Input
Input signal (+/-15V max)
Voltage Monitor
Output
The measured output voltage, scaled by 1/20
Current Monitor
Output
The measured output current, 1 A/V
Overload
RED when the amplifier is disabled or in an overload state
Power
GREEN when the power is on
HV-
Output
Connected to the negative high-voltage power supply rail
HV+
Output
Connected to the positive high-voltage power supply rail
Output-
Output
High-voltage output signal return (used to measure current)
Output
High-voltage output signal
LEMO 00 Output Output
High-voltage output connector, suits LEMO FFA.00.250 cable plug
LEMO 0B Output Output
High-voltage output connector, suits LEMO FGG.0B.302 cable plug
DC Output Volt.
Display showing average output voltage
The front panel connectors and recommended mating plugs are listed below.
Connector
Mating Connector
Manufacturer
PCB Component
BNC
Any BNC
4-Way Screw Terminal
TJ0631530000G
Amphenol
OQ0432510000G
LEMO 00
FFA.00.250
LEMO
EPL.00.250
LEMO 0B
FGG.0B.302
LEMO
EPG.0B.302
The LEMO 0B connector is recommended for applications requiring more than 1 Amp RMS output current.
Preassembled LEMO cable assemblies are available from
www.PiezoDrive.com
