PIETRO FIORENTINI HBC 975, Manual

Page: 26 / 156

26
HBC 975
EN
Use, maintenance and warning manual
SLAM-SHUT VALVE | SAFETY | REV. 00
3.4 - OBLIGATIONS AND PROHIBITIONS
The following is a list of obligations and prohibitions to be observed for the safety of the operator:
• carefully read and understand the instructions for use and warning;
• The downstream equipment must be suitably sized according to the equipment performance required in the actual
operating condition;
• before installing the equipment, the data on the nameplates must be checked;
•
avoid violent shocks and impacts that could damage the equipment and cause the pressure fluid to escape.
It is strictly forbidden to:
• operate in various capacities on the equipment without the PPE indicated in the work procedures described in these
use and warning instructions;
• operate in the presence of open flames or bring open flames close to the work area;
• smoke near the equipment or while working on it;
• use the equipment with parameters other than those indicated on the nameplate;
•
use the equipment with fluids other than those indicated on the nameplate and in these use and warning instructions;
• use the equipment outside the operating temperature range declared on the identification plate and in these use and
warning instructions;
• service the equipment with the portion of the system on which it is installed in operation;
•
install or use the equipment in environments not specified in this manual.