PIETRO FIORENTINI HBC 975, Manual

Page: 17 / 156

17
HBC 975
Use, maintenance and warning manual
SLAM-SHUT VALVE | GENERAL INFORMATION | REV. 00
EN
2.10 - QUALIFIED PROFESSIONAL FIGURES
Qualified operators in charge of using and managing the equipment throughout its technical service life.
Professional figure Definition
Mechanical mainte -
nance technician
Qualified technician able to:
• perform preventive/corrective maintenance operations on all mechanical parts of the
equipment subject to maintenance or repair.
• access all device parts for visual inspection, checking equipment status, making adjust-
ments and calibrations.
The maintenance mechanical technician is not authorised to operate on live electrical sys-
tems (if any).
Electrical maintenance
technician
Qualified technician able to:
• perform preventive/corrective maintenance operations on all electrical parts of the de-
vice subject to maintenance or repair;
• read wiring diagrams and check the correct functional cycle;
• perform adjustments and operate on electrical systems for maintenance, repair and
replacement of worn parts.
The electrical maintenance technician can operate in the presence of voltage inside electri-
cal panels, junction boxes, control equipment etc. only if he/she is a suitable person (S.P.).
For general requirements, refer to the IEC EN 50110-1:2014 standard.
Worker in charge of
transport,
handling,
unloading and
placement on site
Qualified operator:
• for the use of lifting equipment;
• for the handling of materials and equipment.
Lifting and handling of the equipment must be carried out strictly in accordance with the
instructions provided by the manufacturer and in compliance with the regulations in force at
the place where the equipment is installed.
Installer
Qualified technician able to:
• carry out all the operations necessary to properly install the equipment;
• perform all the procedures required to properly and safely install the equipment.
User’s
technician
Technician trained and authorised to use and manage the equipment for the activities it was
supplied for. They must:
• be able to perform all operations required for the proper functioning of the equipment
and the system, and for their safety or that of any personnel present;
• have proven experience in properly using the equipment similar to that described in this
manual, and be trained, informed and instructed in this regard.
The technician may carry out maintenance only if authorised/qualified to do so.
Tab. 2.8.