© 2021 Pierce Manufacturing Inc. All Rights Reserved.
Mid-Mount Ascendant Aerial Tower / 1-5
SAFETY
1-4.
Prepare for Safe Operation
1-4.1
Aerial Device Inspection
Figure 1-2: FAMA39 Warning Label
FAMA39
Your aerial device is a complex machine that requires constant care and thorough inspection. Study the
requirements found in the maintenance section of this manual and NFPA 1911, “
Standard for the Inspection,
Maintenance, Testing and Retirement of In-Service Automotive Fire Apparatus”
to determine the critical points on
the device that should be regularly inspected. Inspect these points and look for signs of wear, corrosion, or damage.
The operator is responsible for knowing the condition of the aerial device before operation. Each aerial operator
should be trained on the inspection process so that they can recognize signs of problems during operation and
understand when operation should be ceased if repairs are required. Inspect the apparatus and aerial device
thoroughly before the start of every shift. If your apparatus is not operated regularly, inspect it at least weekly. Record
any deficiencies and have them corrected immediately. Review the records from the previous shift to ensure that
any deficiencies identified have been corrected.
Before the aerial is put into service, a primary inspection must be performed. Follow the inspection and maintenance
schedule in this manual thereafter.
Inspection Required
Follow the instructions in the
operator’s manual and NFPA
1911 for daily, frequent, and
annual inspection and
maintenance.
Operation of a poorly
inspected aerial device may
injure or kill.
WARNING
Do not paint over this label. Replace if damaged or lost
FAMA39