PictureTel Concorde 4500, Administrator'S Manual, Page: 96 / 250

CONFIGURING GENERAL OPTIONS FOR YOUR SYSTEM
4-16
Each system and its keypad must have the same channel
numbers to distinguish them from the other systems and
keypads in the area. However, you can only send signals from
one keypad to a system at a time.
Note: You do not need to perform this procedure for the
QuickPad.
To set the wireless keypad channel number on the Concorde¥4500:
1. From the Set General Configuration menu, choose Set Wireless
Keypad Channel .
The following message appears:
2. Type a number from 0 to 7, and press ENTER.
F Y I
F.Y.I.
When you have multiple infrared devices (keypads or
otherwise), use the devices one at a time. Infrared signals
from multiple devices can interfere with each other.
Current channel: (number)
Enter new channel: