PictureTel Concorde 4500, Administrator'S Manual, Page: 92 / 250

CONFIGURING GENERAL OPTIONS FOR YOUR SYSTEM
4-12
3. Type the current password, and press ENTER.
The factory default password is
1 2 3.
The following message appears:
4. Choose On or Off.
You return to the Set Password for Menus screen.
Changing the Password
You can use
Change Password
to enter a new system password or to
change the current password. You should then refer to the previous
section, ÒEnabling or Disabling the Password,Ó to enable password
protection.
To enter a new password or to change the current password:
1. From the Set General Configuration menu, choose Set Password
for Menus .
2. Choose Change Password.
The following message appears:
3. Type the current password (or the default password 1 2 3), and
press ENTER.
The following message appears:
4. Type the new password using no more than six digits, and press
ENTER.
The following message appears:
Password Protection: Off On
Enter CURRENT Password:
Enter NEW Password:
Reenter NEW Password: