PictureTel Concorde 4500, Administrator'S Manual, Page: 126 / 250

CONFIGURING AND ADJUSTING THE VIDEO AND AUDIO
5-26
You can adjust the following pan-tilt-zoom camera sources at the
near-end site:
❑
Main
camera
❑
AUX A
camera (usually your auxiliary camera)
❑
AUX B
camera
When you display the menus, the current mode or status is
indicated. When you Þrst install the camera module, all camera
modes and options are set to their default settings, as shown in the
following table.
Any changes you make to these settings through the menus are
saved.
Adjusting the White Balance
Use the procedure in this section to adjust the near-end camera
white balance to compensate for current room lighting conditions.
Table 5-10 describes the adjustment modes.
F Y I
F.Y.I.
You cannot adjust the white balance, focus, or iris settings
while in a call.
Table 5-9: Camera Power-Up Default Settings
Mode/Option Default Setting
White balance Auto
Focus Auto
Iris Auto