PicoVNA Vector Network Analyzer Quick Start Guide
DO296-6
Copyright © 2017–2022 Pico Technology Ltd. All rights reserved. 1
1. Introduction
Thank you for purchasing a PicoVNA vector network analyzer.
The following models are available:
•
PicoVNA 106:
a 6 GHz two-port VNA with built-in bias-T networks
•
PicoVNA 108:
an 8.5 GHz two-port VNA with built-in bias-T networks, mixer
measurements and save on trigger
For further setup information following basic installation, see the
User’s Guide
supplied
with the PicoVNA 2 [108: PicoVNA 3]* software.
For detailed specifications see the
PicoVNA Data Sheet
.
* Unless otherwise stated, information in this guide applies to all models in the
PicoVNA series. Information that applies exclusively to the PicoVNA 108 is written like
this: “[108: <information>]”.
2. Safety information
To prevent possible electrical shock, fire, personal injury, or damage to the product,
carefully read this safety information before attempting to install or use the product. In
addition, follow all generally accepted safety practices and procedures for working with
and near electricity.
This instrument and its accessories have been designed to meet the requirements of
EN 61010-1 (
Safety Requirements for Electrical Equipment for Measurement, Control
and Laboratory Use
).
The following safety descriptions are found throughout this guide:
A
WARNING
identifies conditions or practices that could result in injury or death.
A
CAUTION
identifies conditions or practices that could result in damage to the
product or equipment to which it is connected.
WARNING
This product is for professional use by trained and qualified technicians only.
To prevent injury or death, use the product only as instructed and use only
accessories that have been supplied or recommended by Pico Technology.
Protection provided by the product may be impaired if used in a manner not
specified by the manufacturer.
English
