pico Technology PicoScope 2203, User Manual

Page: 8 / 22

PicoScope 2203, 2204, 2205 User's Guide 4
Copyright © 2008 Pico Technology Limited. All rights reserved. ps2203.en
2.4
FCC notice
This equipment has been tested to meet CFR47 (2006) Part 15 of the FCC limits
for Class A equipment. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his or her own expense.
The PicoScope 2203, 2204 and 2205 PC Oscilloscopes were successfully tested to the
standard.
For safety and maintenance information see the safety warning .
2.5
CE notice
The PicoScope 2203, 2204 and 2205 PC Oscilloscopes meet the intent of the EMC
directive 89/336/EEC and have been designed to EN61326-1 (2006) Class A
Emissions and Immunity standard.
The PicoScope 2203, 2204 and 2205 PC Oscilloscopes also meet the intent of the Low
Voltage Directive and have been designed to meet the BS EN 61010-1:2001 IEC
61010-1:2001 (Safety requirements for electrical equipment for measurement,
control and laboratory use) standard.
3