pico Technology PicoScope 2000 Series Programmer'S Manual Download Page 62

Page: 62 / 68

Driver error codes

ps2000pg.en-12

PicoScope 2000 Series Programmer's Guide

Driver error codes

Code

Name

Description

PS2000_OK

The oscilloscope is functioning correctly.

PS2000_MAX_UNITS_OPENED

Attempts have been made to open more than

PS2000_MAX_UNITS

oscilloscopes.

PS2000_MEM_FAIL

Not enough memory could be allocated on the
host machine.

PS2000_NOT_FOUND

An oscilloscope could not be found.

PS2000_FW_FAIL

Unable to download firmware.

PS2000_NOT_RESPONDING

The oscilloscope is not responding to commands
from the PC.

PS2000_CONFIG_FAIL

The configuration information in the oscilloscope
has become corrupt or is missing.

PS2000_OS_NOT_SUPPORTED

The operating system is not supported by this
driver.

Summary of Contents for PicoScope 2000 Series





































































Search results

Summary of Contents for PicoScope 2000 Series

Reviews:

Related manuals for PicoScope 2000 Series

Brands by name

Popular brands

pico Technology PicoScope 2000 Series, Programmer'S Manual

Search results

Summary of Contents for PicoScope 2000 Series

Reviews:

Related manuals for PicoScope 2000 Series

Brands by name

Popular brands