PICASO 3D Designer X, User Manual

Page: 5 / 68

SAFETY AND PRECAUTIONS
4
Designer XL complies with European Parliament Directives 2014/35/EU on low-
voltage equipment and 2014/30/EU on electromagnetic compatibility.
Do not use Designer XL to store foreign objects. Foreign objects in the printer’s
working area can damage Designer XL’s components.
Do not use Designer XL to heat up food or other items.
Do not expose Designer XL to external temperature effects and/or liquids, gases,
electric and/or magnetic fields, which can damage the device’s electronic or
mechanical components.
Do not use the 3D printer in a humid or dusty environment. Follow the requirements
for the
workplace .
During its operation, the device may produce a specific smell of molten filament.
This is a feature of the printing process. We recommend using the 3D printer in a
well-ventilated area. Do not leave the working printer unattended.
Designer XL is not intended for use by the disabled, unless they are supervised by a
person who is responsible for their safety.
It is forbidden to use Designer XL by persons under the influence of alcohol, drugs
and/or other intoxicants.
Handle the 3D printer carefully — it includes electronic components and mechanical
parts that can be damaged if hit or dropped.
Some 3D printer’s parts operate at a high temperature. To avoid burns, be careful
not to touch heated surfaces while printing and servicing the device. Wait at least
10-15 minutes for the unit’s heating elements to cool down before opening the lid.