Engl
ish
29
H07025720 / DT2000722 - Rev. 03
Dear Customer,
Thank you for having chosen one of our products, which is the result of years of experience and continuous research aimed at making a
superior product in terms of safety, reliability and performance.
This booklet contains information and advice for safe and efficient use of your product.
DT2010001-01
See the guarantee certificate enclosed with the product for the terms, limitations and exclusions.
In line with its policy of constant product improvement and renewal, the manufacturer may make changes without notice.
This document is the property of Gruppo Piazzetta S.p.A.; no part of it may be disclosed to third parties without the written permission
of Gruppo Piazzetta S.p.A.
All rights reserved by Gruppo Piazzetta S.p.A..
•
This instruction booklet has been prepared by the manufacturer
and is an integral part of the product. In the event of sale or relo-
cation of the product make sure this booklet accompanies it, since
the information contained in it is addressed to the purchaser and
to anyone involved in the installation, use and maintenance of the
product.
•
Read the instructions and the technical information contained in
this booklet carefully before proceeding with installation, use or
any repairs.
•
The observance of the instructions and technical information in
this instruction booklet guarantees the safety of persons and pro-
perty; it also ensures more efficient operation and an increased li-
fespan.
•
Gruppo Piazzetta S.p.A. cannot be held responsible for damage or
injury due to failure to comply with the instructions for installa-
tion, use and maintenance given in this booklet, or due to unau-
thorised alterations or to the use of other than original spare
parts.
•
Appliance installation and use must conform with the manufac-
turer’s instructions as well as with European and national legisla-
tion and local regulations.
•
The wall against which the product is to be placed must not be of
wood or any other flammable material. For correct installation it
is also important to maintain safety distances (refer to the section
entitled “
MINIMUM SAFETY DISTANCES
”).
•
Prior to completing installation of the surround, light the stove
and when it has heated up check that the grate and that the flue
connection is correct.
•
Check that the floor where the product is to be installed is per-
fectly level.
•
Do not fix the heater unit in any way whatsoever, but simply place
it next to the surround.
•
When handling the steel parts of the surround or the ceramic
parts it is advisable to use clean cotton gloves to avoid leaving fin-
gerprints that are difficult to remove at first time of cleaning
•
The fireplace must be assembled by two persons.
•
This appliance has been designed solely for heating. It is not re-
commended for cooking foods.
•
Stop using the product in the event of fault or malfunctioning.
•
The product you have purchased may differ slightly from the one
illustrated in this booklet since the pictures are only given as an
indication and not an exact portrayal.
UNI EN 832 . . . . . . . . . . . . . . . . . . . . . . . .Thermal performance of buildings - Calculation of energy use for heating
UNI EN 13229 . . . . . . . . . . . . . . . . . . . . . .Inset appliances including open fires fired by solid fuels - Requirements and test methods
UNI 10683:2005 . . . . . . . . . . . . . . . . . . . . .Heating appliances fired by wood or other solid biofuels - Installation requirements
UNI EN 13384 . . . . . . . . . . . . . . . . . . . . . .Chimneys - Thermal and fluid dynamic calculation methods
UNI 7129 . . . . . . . . . . . . . . . . . . . . . . . . . .Gas plants for domestic use fed by network distribution
UNI 10847 . . . . . . . . . . . . . . . . . . . . . . . . .Chimneys for generators feeded with liquid and solid flues - Maintenance and inspection
EN 1856-1 . . . . . . . . . . . . . . . . . . . . . . . . .Chimneys - Requirements for metal chimneys - Part 1: System chimney products
EN 1856-2 . . . . . . . . . . . . . . . . . . . . . . . . .Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes
UNI EN 1443 . . . . . . . . . . . . . . . . . . . . . . .Chimneys – General requirements
DIN 18 895 . . . . . . . . . . . . . . . . . . . . . . . . .Fireplaces
DIN 51731 class of measurement HP2 . .Fuels
IMPORTANT INFORMATION
DT2010139-00
REFERENCE STANDARDS
DT2010140-02