PIAGGIO X7 EVO 125ie, Manual

Page: 19 / 90

FINAL STAGE
After extracting the key to be programmed « B », insert the «MASTER» key « A » again
and turn it to « ON » (perform this operation within the 10 seconds following the ex-
traction of the previous key). Leave it in this position for 1 to 3 seconds and return it
to «
OFF ».
01_16
CORRECT PROGRAMMING CHECK PHASE
Insert the «MASTER» key « A » disabling the transponder « C » (i.e., by tilting the key
cap by 90°), and turn the key to « ON ». Perform the engine starter operation. Ensure
that the engine does not start. Insert the programmed key « B » and repeat the starter
operation. Check that engine starts.
WARNING
SHOULD YOU START THE ENGINE WITH THE MASTER KEY (WITH TRANS-
PONDER OFF) OR IN THE EVENT OF WRONG OPERATION DURING PROGRAM-
MING, REPEAT THE PROCEDURE FROM THE BEGINNING.
01_17
Accessing the fuel tank (01_17, 01_18, 01_19)
Set the start-up switch to « ON » or « OFF » and press the fuel tank port opening button
« N ». The tank port will open allowing access to the fuel tank cap.
19
1 Vehicle