PIAGGIO Beverly Tourer 125, Service Station Manual

Page: 9 / 278

Specification Desc./Quantity
Cubic capacity 124 cm³
Compression ratio 12 ± 0.5: 1
Idle speed 1,650 ± 100 rpm
Air filter sponge, impregnated with mixture (50% oil and 50% unleaded
petrol).
Lubrication Engine lubrication with lobe pump (inside crankcase) controlled
by a chain with double filter: mesh and paper.
Fuel supply KEIHIN CVEK 30 carburettor and electrical fuel pump.
Max. Power 11 kW at 9,750 rpm
MAX. torque 12 Nm at 8,000 rpm
Transmission
TRANSMISSION
Specification Desc./Quantity
Main drive Automatic expandable pulley variator with torque server, V-
belt, automatic self-ventilating centrifugal dry clutch
Final reduction
Gear reduction unit in oil bath.
Capacities
CAPACITY
Specification Desc./Quantity
Engine oil 1.10 l
Transmission oil 250 cm³
Cooling system fluid 1.75 l
Fuel tank (reserve) ~ 10 l (2 l)
Electrical system
ELECTRICAL SYSTEM
Specification Desc./Quantity
Ignition type Electronic capacitive discharge ignition (CDI) and variable ad-
vance, with separate HV coil.
Ignition advance 10° ± 1° at 2,000 rpm
Spark plug CHAMPION RG4HC
Alternative spark plug NGK CR8EB
Battery Sealed, 12 V / 10 Ah
Fuses Three 15A fuses, two 10A fuses, three 7.5A, one 4A fuse, one
3A fuse
Generator alternating current
Frame and suspensions
FRAME AND SUSPENSIONS
Specification Desc./Quantity
Type of chassis Welded tubular steel chassis with stamped sheet reinforce-
ments.
Front suspension Hydraulic telescopic fork with advanced wheel pin and Ø 35
mm stem
Front fork max. stroke 104 mm
Rear suspension Two double-acting shock absorbers, adjustable to four posi-
tions at preloading.
Rear shock absorber max. travel 95.5 mm
Beverly 125
Characteristics
CHAR - 9