PIAGGIO Beverly 300 i.e., Service Station Manual, Page: 94 / 333

4) If components are in good conditions, check that the wiring connecting them is not interrupted.
5) Check if there is continuity of the Orange-Blue cable between the start-up remote control switch and
the control unit connector.
Horn control
KEY
1 . Battery
2 . Fuse No. 1
3 . Key switch contacts
4 . Fuse No. 8
5 . Horn button
6 . Horn
WARNING
ALL CONTINUITY TESTS MUST BE CARRIED OUT WITH THE CORRESPONDING CONNECTORS
DISCONNECTED.
1) Check fuses No. 1 and 8, key switch contacts and the horn button.
2) If the components are not damaged, check wiring for continuity.
3) Check that the Yellow-Pink cable between the horn and horn button is not interrupted.
4) Check that the Black cable of the horn is earthed.
Electrical system
Beverly Tourer 300 i.e.
ELE SYS - 94