PIAGGIO Beverly 300 i.e., Service Station Manual, Page: 83 / 333

52. high-beam warning light
53. headlight remote control
54. auxiliary fuses unit: fuses 7,8,10
55. stop buttons
Checks and inspections
This section is dedicated to the checks on the electrical system components.
Immobiliser
The electronic ignition system is controlled by the
control unit with the integrated Immobilizer sys-
tem. The immobilizer is an anti-theft system that
allows the vehicle to be operated only when it is
started with coded keys recognised by the control
unit. The code is integrated in a transponder in the
key block. This allows the driver clear operation
without having to do anything other than just turn-
ing the key. The Immobilizer system consists of the
following components:
- an electronic control unit
- immobilizer aerial
- master key with built-in transponder
- service key with built-in transponder
- diagnosis LED
The diagnosis LED also works as a theft-deterrent
blinker. This function is activated every time the
key switch is set to «OFF» or the engine emer-
gency cut-off switch is set to «OFF». It remains
activated for 48 hours in order not to affect the
battery charge. When the ignition switch is turned
to «ON», the deterring blinker function is deacti-
vated. Subsequently, a flash confirms the switch-
ing to « ON». The duration of the flash depends on
the programming of the electronic control unit If the
LED is off regardless of the position of the ignition-
key switch and/or the instrument panel is not initi-
ated, check if:
Beverly Tourer 300 i.e.
Electrical system
ELE SYS - 83