background image

-1-

PKI-0017-2

 LP570

Installation Instructions

Thank you very much for purchasing PIAA product. 
Please read this entire manual before installation and use of this product.

Please read the cautionary points before installation to ensure safe utilization of the product.

● The lamp and  the switch harness are intended for automobile use. Do not use for any other purpose.
● This lamp is intended for use in rain (day or night), during foggy or snowy conditions where visibility is hampered. 
  Do not use during normal driving conditions.
● Do not operate the switch while driving.
● If the lamp is kept on when the engine is not running, it may drain the battery.
● Make sure the lamp is installed securely before driving the vehicle. If an abnormality is found, adjust it immediately. 
● Check for any loose screws that hold the lamp in place before driving. If you find any loose screws or bolts (if a bracket is 
  used), tighten them securely. If you notice a loose part while driving, inspect the section immediately and make the necessary 
  adjustments.
● Avoid repeatedly turning the lamp off and on as it may reduce the overall life of the LED.
● Some of vehicles are produced high voltages of electric charge when you start engine. Avoid loading extra voltage to lamps,
  please turn the switch off when you start engine.
● Avoid needless disassembly of the lamp or the switch harness as it may cause it to fail.
● If the lamp and/or the switch harness is removed and set aside for safekeeping, wipe away all dust or grime and store in an
  place free of moisture.
● If the lens is cracked or damaged in any way, verify whether there is any damage to the harness or the switch harness that it is 
  connected to. If there is any damage to the cord covering, replace it immediately.
● Avoid injury when replacing the harness and the switch harness. Please dispose of it as a non-combustible item.

※  The                and                  marks indicated in this manual are 
  cautionary  points related to the installation of the product. 
  To ensure safe and secure installation of the product, please follow these points closely.

 

To user 

…   Please keep this manual and a receipt which can be recognized the 

 

 

  shop name you bought at. 

 

 

  When giving this product to a third party, always include this manual 

 

 

  together with the product.

  To shop owners installing the product  …  After installation of the product, make sure the customer is provided 

 

 

  with this ownerʼ s manual.

● The lamp becomes very hot when turned on. When parking your car near flammable items such as dried leaves, turn off the 
  lamp as it may cause a fire.
● Do not look directly into the light for long periods. Doing so may cause eye irritation or visual impairment.

Summary of Contents for LP570









Reviews: