1 About this Document
V-273 VC Linear Actuator
MP155E
Version: 1.1.4
3
Term
Explanation
Max. push/pull
force
Force control:
When a counterforce is exerted on the linear actuator, the
linear actuator maximally counteracts it with the target force
value. If the counterforce exceeds the target force value,
displacements are possible.
When the servo mode is switched off, the weight force of the
moving mass can be compensated for by an AutoZero
procedure (see user manual of the C-413 controller).
Incremental position
sensor
Sensor (encoder) for detecting changes of position or changes
of angle. Signals from the incremental position sensor are
used for axis position feedback. After the controller is
switched on, referencing must be done before absolute
target positions can be commanded and reached.
1.4
Figures
For better understandability, the colors, proportions, and degree of detail in illustrations can
deviate from the actual circumstances. Photographic illustrations may also differ and must not
be seen as guaranteed properties.
1.5
Other Applicable Documents
The devices and software tools from PI mentioned in this documentation are described in
separate manuals.
Product
Document
C-413 PIMag® Controller
MS224E User Manual
PIMikroMove
SM148E Software Manual
1.6
Downloading Manuals
INFORMATION
If a manual is missing or problems occur with downloading:
Contact our customer service department (p. 35).
Downloading manuals
1.
Open the website
www.pi.ws
.
2.
Search the website for the product number (e.g., P-882) or the product family (e.g.,
PICMA® bender).