PI P-603 Series, User Manual, Page: 17 / 21

User Manual
P603T0001, valid for P-603
CBo, 1/11/2021
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 17 / 21
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws , www.pi.ws
P-603.1S1
P-603.1S2
P-603.3S1
P-603.3S2
P-603.5S1
P-603.5S2
P-603.x01
Open-loop
versions
Unit
Voltage connection S1 versions: Bare
stranded wires
S2 versions:
LEMO (low
voltage)
S1 versions: Bare
stranded wires
S2 versions:
LEMO (low
voltage)
S1 versions: Bare
stranded wires
S2 versions:
LEMO (low
voltage)
as P-603.xS1
Sensor connection S1 versions: Bare
stranded wires
S2 versions:
LEMO (strain
gauge sensor)
S1 versions: Bare
stranded wires
S2 versions:
LEMO (strain
gauge sensor)
S1 versions: Bare
stranded wires
S2 versions:
LEMO (strain
gauge sensor)
–
Recommended electronics E-610, E-625 E-610, E-625 E-610, E-625 E-610, E-831
The resolution of the system is only limited by the noise of the amplifier and measuring technology because PI piezo
actuators are free of friction.
Ask about customized versions.
Maximum Ratings
P-603 PiezoMove linear flexure actuators are designed for the following operating data:
Model Maximum operating
voltage
Maximum operating
frequency (unloaded) 1
Maximum power
consumption 2
P-603.101 -20 to 120 V 300 Hz 6 W
P-603.1S1 -20 to 120 V 6 W
P-603.1S2 -20 to 120 V 6 W
P-603.301 -20 to 120 V 135 Hz 8 W
P-603.3S1 -20 to 120 V 8 W
P-603.3S2 -20 to 120 V 8 W
P-603.501 -20 to 120 V 100 Hz 10 W
P-603.5S1 -20 to 120 V 10 W
P-603.5S2 -20 to 120 V 10 W
1 To ensure stable operation, the maximum operating frequency is defined as approximately 1/3 of
the mechanical resonant frequency.
2 The heat generated by the piezo actuator during dynamic operation limits the value for maximum
power consumption.
Details can be found online:
https://www.physikinstrumente.com/en/technology/piezo-technology/properties-piezo-
actuators/electrical-operation/