PI P-2 5 Series, User Manual, Page: 50 / 57

10 Technical Data
46 Version: 1.1.1 PZ245E P-2x5 Piezo Actuator
10.2.2 P-2x5 with P-177.50 Option (Temperature Sensor and Purge Air
Connector)
The M3-PK-2 plug nipples are provided for the purge air connector when the P-2x5 is ordered
with the option "PT1000 temperature sensor and purge air connector for PICA HVPZT"
(P-177.50) (p. 13).

Position of the purge air inlet: In the base of the piezo actuator across from the cable
exit, 20 mm above the lower edge of the base

Position of the purge air outlet: In the housing tube of the piezo actuator above the
cable exit; exact position on request

Contact our customer service department (p. 39) for details on the position of the plug
nipples.
10.2.3 P-2x5 with the P-706.00 Option (Water-Resistant Housing)
The dimensions of the P-2x5 with water-resistant case are supplied on request.

Contact our customer service department (p. 39).
10.2.4 Ball Tip P-176.B25
Figure 11: P-176.B25 (1 = plane hardened and polished