8 GCS Commands
134
Version: 1.2.1
MS249E
C-863.12 Mercury Controller
command level 2 or higher (p. 259).
Response:
None
Troubleshooting: Invalid password
Notes:
With the C-863.12, the command levels only determine the
write permission for the parameters. The availability of the
commands of the C-863.12 is independent of the active
command level.
HPA? (p. 159) lists the parameters including the
information on which command level allows write access
to them. For further information on using parameters, see
"Adapting Settings" (p. 231).
After controller switch-on or reboot, the active command
level is always level 0.
CCL? (Get Command Level)
Description:
Get the active "command level".
Format:
CCL?
Arguments:
none
Response:
<Level> is the currently active command level; uint.
Notes:
<Level> should be 0 or 1.
<Level> = 0 is the default setting, write access is specified
for level 0 parameters, read access is specified for all
parameters
<Level> = 1 allows write access for level 1 parameters
(parameters from level 0 are included).
CPY (Copy Into Variable)
Description:
Copies a command response to a variable (p. 118).
The variable is present in volatile memory (RAM) only.
Format:
CPY <Variable> <CMD?>