User Manual
MP40E, version 1.2.0, valid for M-227.10, M-227.25, M-227.50
CBo, 5/20/2019
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Page 7 / 26
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email
Safety Precautions
Mechanical Dangers
CAUTION
Risk of crushing!
Risk of minor injuries or damage to equipment from crushing between the pusher and a fixed
part or obstacle.
Use protective structures to keep limbs away from areas in which they could be seized by
moving parts.
Maintain safety distances according to DIN EN ISO 13857.
Mount the M-227 so that the motion of the pusher is not hindered by objects in the
workspace.
NOTICE
Damage due to excessive torque on the pusher!
Excessive torque on the pusher (e.g., when the tip is replaced) can damage the M-227.
Do
not
exceed a torque of 1 Nm on the pusher.
NOTICE
Increased friction from lateral forces on the pusher!
Lateral forces acting on the pusher impair the motion of the pusher and increase wear on the
drive components.
Avoid lateral forces on the pusher of the M-227.
NOTICE
Damage from wrong clamping or clamping too tightly!
Wrong clamping or clamping too tightly can damage the M-227.
Do
not
clamp the M-227 on the motor housing (p. 9).
Do
not
clamp the M-227 too tightly.
NOTICE
Cable break due to excessively bent or crushed cable!
A cable break leads to failure of the M-227.
Install the M-227 so that the cable cannot be bent too strongly or crushed during
operation.