5 Installation
L-738 / V-738 Precision XY Stage
MP183E
Version: 1.1.2
17
5.1
General Notes on Installation
DANGER
For V-738 models: Magnetic fields!
Magnetic fields may damage or interfere with sensitive devices and objects (e. g.
cardiac
pacemakers
, EC-cards, magnetic data carriers).
The fields are also effective when the
positioner is not connected to the controller/electric power.
Loose magnetizable objects (e.g. made of iron, steel) may be attracted and cause damages. The
corresponding pull might not be manually compensated.
If applicable, note the usual precautions for applying pacemakers.
Remove loose magnetizable objects and sensitive devices from the installation site.
Ensure that hazardous areas are marked correspondingly and that the usual precautions
are applied.
Keep sufficient distance from the positioner.
Apply corresponding precautions also for storage and transport of the positioner.
NOTICE
Cable break!
A cable break leads to failure of the stage.
Install the stage so that the cable is not bent too strongly or crushed.
NOTICE
Heating up of the L-738 / V-738 during operation!
The heat produced during operation of the L-738 / V-738 can affect your application.
Install the L-738 / V-738 so that the application is not impaired by the dissipated heat.
NOTICE
Damage due to removed caps or screws!
Removing caps and screws can lead to contamination and failure of the V-738.
Do
not
loosen screws on the stage, except when removing the transport lock (p. 20).
Do
not
remove any caps other than the ESD protection.
Remove the ESD protection only when connecting to the controller.
5
Installation
