PI L-417 9025E1 Series, User Manual

Page: 14 / 42

4.4 Direction of Motion
Figure 6: Bewegungsrichtung des L-417 bei positiver Kommandierung
4.5 Scope of Delivery
Product number Description
L-417.xx9025E1 Linear stage according to the order (p. 10)
For L-417.xx9025E1 with xx = 05, 09, 13, 17:
L417B0014 Mounting kit for mounting the
L-417.xx9025E1, consisting of
■
12 socket head screws, ISO 4762 M6×30
■ 2 dowel pins, ISO 2338, 4h8×12
■
12 flat washers, ISO 7092, D11 d6.4 h1, 6
mm
For L-417.xx9025E1 with xx = 21, 25, 33:
L417B0015 Mounting kit for mounting the
L-417.xx9025E1, consisting of
■
20 socket head screws, ISO 4762 M6×30
■ 2 dowel pins, ISO 2338, 4h8×12
■
20 flat washers, ISO 7092, D11 d6.4 h1, 6
mm
MP187EK Short instructions for positioners with elec-
tric motors to 320 V
For L-417.xx9025E1 with xx = 21, 25, 33:
V417B0029 Transport means: Carrying aid for the
L-417.xx9025E1
4.6 Suitable Electronics
The L-417.xx9025E1 must be connected to suitable electronics that supply the necessary
voltage for operating and if required, to evaluate the sensor and limit switch signals. The
following electronics are suitable:
Product number Description
G-901.R519[x] ACS controller with ACS driver module, 2 / 3 / 4 axes, intermediate cir-
cuit voltage 96 V / 2000 W
On request ACS modular controller
Also compatible with other 3rd-party controllers and servo drivers
4 PRODUCT DESCRIPTION L417UM0002EN
‒
10/25/2022
14
M O T I O N | P O S I T I O N I N G