User Manual
F712T0002, valid for F-712.MA1 and F-712.MA2
Mma, BRo, 12/6/2019
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Page 16 / 45
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email
Scope of Delivery
Item No.
Quantity
Description
F-712.MA1 F-712.MA2
E-712K252
1
-
Controller for spindle- and piezo-driven axes, incl.
cables
E-712K236
-
1
Controller for spindle- and piezo-driven axes, incl.
cables
E-712.CD
1
1
CD with software and documentation for E-712
E-712.USB
1
1
USB stick with software and documentation for E-712
P-616K001
1
2
NanoCube® nanopositioner
F712B0001
1
2
Stack consisting of:
Three M-122K025 linear stages with DC motor
Z- and X-adapter for assembly of the linear stages
Nanopositioner adapter
K040B0294 3
6
DC motor cable, D-Sub 15 m/f, 4 m
E-711.I1B
1
1
Analog input cable for E-712 controller, BNC to Lemo,
1.5 m
000036450
1
2
Screw set for protective earth
000045698
2
4
Screws ISO 14580 M3x25
000066715
1
2
Screw set: 4 x ISO 4762 M6x25, 1 x Hex key AF 5
User docu-
mentation
F712T0002 user manual for the alignment system (this
document), and further documents, see “Other
Applicable Documents” (p. 5)
Optional Accessories
Item No.
Description
C-887.MC2*
Manual control unit, USB connector, 3 m cable
F-603.41
F-603.42
F-603Kxxx
Fiber holders with fiber optic ferrules 1.25 mm, 2.5 mm, and 3.2 mm;
customized versions on request
F-712.PM1
Optical power meter, 400-1550 nm wavelength range, to 1 mA input
current, 20 kHz signal bandwidth, logarithmic output ±5 V, benchtop device,
including power adapter
* The manual control unit has to be plugged into a USB port of the host PC and used in
PIMikroMove as an HID device. The display is not addressed by the host PC, only the positioning
knobs can be used.
