0x3003308 Sensor Analog Offset 1 (V)
Description:
Offset 1 for correcting the analog signals of the incremental sensor.
Data type
FLOAT
Command level
2
Item type
Axis
Source of data
ID chip of the mechanics
0x7000000 Range Limit Min
Description:
Additional soft limit for the negative direction of motion (physical
unit).
If the current position reaches this value in either closed-loop or
open-loop operation, the control value is set to zero and the motion
is stopped as a result. The axis can move again as soon as the value
for the soft limit has been decreased.
Data type
FLOAT
Command level
0
Item type
Axis
Source of data
Positioner database
0x7000001 Range Limit Max
Description:
Additional soft limit for the positive direction of motion (physical
unit).
If the current position reaches this value in either closed-loop or
open-loop operation, the control value is set to zero and the motion
is stopped as a result. The axis can move again as soon as the value
for the soft limit has been increased.
Data type
FLOAT
Command level
0
Item type
Axis
Source of data
Positioner database
10 PARAMETER REFERENCE
PZ285EN
‒
1/30/2019
199
M O T I O N | P O S I T I O N I N G