User Manual
E727T0005, valid for E-727
BRO, 2019-06-28
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Page 62 / 240
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email
Communication via the USB Interface
Establishing communication via USB
The procedure for PIMikroMove is described in the following. The procedure for other PC software
programs (PITerminal, drivers for use with NI LabVIEW software) is similar.
1.
Start PIMikroMove.
The
Start up controller
window opens with the
Connect controller
step.
−
If the
Start up controller
window does not automatically open, select the
Connections > New
...
menu item in the main window.
2.
Select
E-727
in the field for controller selection.
3.
Select the
USB
tab on the right side of the window.
4.
On the
USB
tab, select the connected E-727.
5.
Click
Connect
to establish communication.
If communication has been successfully established, the
Start up controller
window switches
to the
Start up axes
step.
AutoZero Procedure
INFORMATION
During the AutoZero procedure, the axis will move, and the motion can cover the whole travel
range.