1
www.phywe.com, © All rights reserved
12632.00 / 4808
Operating instructions
Cobra4 Sensor-Unit Condu,
Conductivity / Temperature Pt1000
12632.00
PHYWE Systeme GmbH & Co. KG
Robert-Bosch-Breite 10
D-37079 Göttingen
Phone
+49 (0) 551 604-0
Fax
+49 (0) 551 604-107
Fig. 1: 12632.00 Cobra4 Sensor-Unit Condu
The unit complies with
the corresponding EC
guidelines.
CONTENTS
1 SAFETY PRECAUTIONS
2 PURPOSE AND CHARACTERISTICS
3 FUNCTIONAL AND OPERATING ELEMENTS
3.1 Operating elements
3.2 Sensor interface
4 NOTES ON OPERATION
5 HANDLING
5.1 Putting into operation
5.2 Recording of conductivity values
5.3 Cleaning and care of conductivity measuring cells
5.4 Recording of temperatures
6 TECHNICAL SPECIFICATIONS
7 PARTS SUPPLIED
8 ACCESSORIES
8.1 Probes that can be directly connected
8.2 Probes needing an adapter for connection
8.3 Calibration solution for conductivity measuring cells
8
.4 Storage of conductivity measuring cells
9 NOTES ON THE GUARANTEE
10 WASTE DISPOSAL
1 SAEFTY PRECAUTIONS
•
Carefully read these operating instructions completely
before operating this instrument. This is necessary to
avoid damage to it, as well as for user-safety.
•
Only use the instrument for the purpose for which it was
designed.
•
Only use the instrument in dry rooms in which there is no
risk of explosion.
•
Protect Cobra4 Sensor-Unit Condu from dust,
moisture and vapours. Use a slightly moist lint-free cloth
to clean the instrument. Do not use aggressive cleaning
agents or solvents.
•
Take care that no liquid penetrates in through the hous-
ing openings, as such penetration would result in dam-
age to Cobra4 Sensor-Unit Condu.
•
Only use the experimental set-up for the purpose for
which it is intended.
•
Do not open up the instrument.
•
Only connect the data output of Cobra4 Sensor-Unit
Condu to the measured data recording instru-
ments specifically intended for it.
•
The present-day state of software development makes it
impossible to guarantee that a product is free of faults.
PHYWE Systeme GmbH & Co. KG therefore does not
take on any liability for damages that occur during the
installation or the use of the instrument.