phytron
7. Always switch off the supply voltage if you connect or disconnect any wires or
connectors at the power stage.
Most important:
Do not unplug the motor connector while powered!
Danger of electric arcing!
8. The maximum voltage of the signal inputs and outputs must not exceed
5 V
DC
(I/O connectors).
9. Pressing the push-button Reset is no safe separation in the emergency case.
The voltage supply has to be interrupted for switching off the drive safely.
10. The surface of the power stage board and the heat sink may reach
temperatures of more than 85 °C.
Danger of injury if touching the surface!
11
MA 1233-A006 GB