Preface
Preface
This Hardware Manual describes only the functions of PHYTEC
phyCORE-TriCORE Development Board for the phyCORE-TC1130
and phyCORE-TC1796 module. The controllers and modules are not
described herein. Precise specifications for Infineon’s TC1130 or
TC1796 Tricore microcontroller series controller can be found in the
enclosed microcontroller Data Sheet/User's Manual. If software is
included please also refer to additional documentation for this
software.
In this hardware manual and in the attached schematics, low active
signals are denoted by a "/" in front of the signal name (i.e.: /RD). A
"0" indicates a logic-zero or low-level signal, while a "1" represents a
logic-one or high-level signal.
Declaration of Electro Magnetic Conformance of the
PHYTEC phyCORE-TriCORE Development Board
PHYTEC Single Board Computers (henceforth products) are designed
for installation in electrical appliances or as dedicated Evaluation
Boards (i.e.: for use as a test and prototype platform for
hardware/software development) in laboratory environments.
Caution:
PHYTEC products lacking protective enclosures are subject to
damage by ESD and, hence, may only be unpacked, handled or
operated in environments in which sufficient precautionary measures
have been taken in respect to ESD-dangers. It is also necessary that
only appropriately trained personnel (such as electricians, technicians
and engineers) handle and/or operate these products. Moreover,
PHYTEC products should not be operated without protection circuitry
if connections to the product's pin header rows are longer than 3 m.
©
PHYTEC Meßtechnik GmbH 2009 L-730e_0
1