phyCORE-TriCore Development Board
1.3.10
DS2401 Silicon Serial Number
Communication to a DS2401 Silicon Serial Number can be
implemented in various software applications for the definition of a
node address or as copy protection in networked applications. The
DS2401 is optionally populated on U2 on the Development Board.
The Silicon Serial Number Chip mounted on the phyCORE-TriCORE
Development Board can be connected to port pin P2.10 of the TC1130
or port pin P8.0 of the TC1796.
Jumper Setting
Description
JP1
closed
Port pin P2.10 of the TC1130
is used to access the Silicon Serial Number
JP1
closed
Port pin P8.1 of the TC1796
is used to access the Silicon Serial Number
Table 21:
JP1 Jumper Configuration for Silicon Serial Number Chip
Figure 18: Connection of the DS2401 Silicon Serial Number
36
©
PHYTEC Meßtechnik GmbH 2009 L-730e_0
not
connected
GPIO Port
NUMPORT
JP1
