Quick
Start
Guide
L-1
00
7e.A0
Germany
PHYTEC Messtechnik GmbH
D-55129 Mainz
t +49 6131 9221-32
f +49 6131 9221-33
www.phytec.de
www.phytec.eu
USA
PHYTEC America LLC
Bainbridge Island, WA 98110
t +1 206 780 9047
f +1 206 780 9135
www.phytec.com
France
PHYTEC France SARL
F-72140 Sillé le Guillaume
t +33 2 43 29 22 33
f +33 2 43 29 22 34
www.phytec.fr
India
PHYTEC Embedded Pvt. Ltd.
Bangalore
560102
t +91 80 40867046
www.phytec.in
China
PHYTEC Information Technology Co. Ltd.
Nanshan District, Shenzhen
518026 PRC
t +86 755 6180 2110
www.phytec.cn
Quick
Start
Guide
phyBOARD
®
-Sargas
with phyCORE
®
-STM32MP1
CONNEC TORS
Figure 1:
Boot Switch (S7) SD Card Setting
LEDs | JUMPERS / SWITCHES
phyCORE
®
-STM32MP1
phyBOARD
®
-
Sargas / SBC Kit
Get your phyCORE-STM32MP1 / SBC Kit powered up and connected
in just a few simple steps.
1
|
PREPARING THE HARDWARE
1.
Have the included connection cables on hand: two USB-A to USB-B Micro cables,
a standard Ethernet cable and the 24 V power adapter (+24 V / 1 A).
2.
Insert the micro SD Card into the uSD Card connector (X14).
3.
Set the DIP-Switch (S7) to SD Card (Figure 1).
4.
Power up the phyCORE-STM32MP1 by connecting the power adapter (+24 V DC)
to the power supply connector (X9).
Kit Contents
phyBOARD- phyCORE-STM32MP1
Power A24 V 2x5 header to
SD Card
PCM-068-025113I.A0
DB-sub 9 male (x2)
Ethernet Cable
USB flash drive USB-A to USB-B
with Virtual Machine Micro Cables (2x)