Phytec phyCORE-MPC5200B tiny, Hardware Manual

Page: 11 / 104

Introduction
©
PHYTEC Messtechnik GmbH 2006 L-678e_0
3
1 Introduction
The phyCORE-MPC5200B tiny belongs to PHYTEC's phyCORE
Single Board Computer module family. The phyCORE SBCs
represent the continuous development of PHYTEC Single Board
Computer technology. Like its mini-, micro- and nanoMODUL
predecessors, the phyCORE boards integrate all core elements of a
microcontroller system on a sub-miniature board and are designed in a
manner that ensures their easy expansion and embedding in peripheral
hardware developments.
As independent research indicates that approximately 70 % of all EMI
(Electro Magnetic Interference) problems stem from insufficient
supply voltage grounding of electronic components in high frequency
environments the phyCORE board design features an increased pin
package. The increased pin package allows dedication of
approximately 20 % of all pin header connectors on the phyCORE
boards to Ground. This improves EMI and EMC characteristics and
makes it easier to design complex applications meeting EMI and EMC
guidelines using phyCORE boards even in high noise environments.
phyCORE boards achieve their small size through modern SMD
technology and multi-layer design. In accordance with the complexity
of the module, 0402-packaged SMD and laser-drilled Microvias
components are used on the boards, providing phyCORE users with
access to this cutting edge miniaturization technology for integration
into their own design.
The phyCORE-MPC5200B tiny is a subminiature (53 x 57 mm)
insert-ready Single Board Computer populated with Freescale’s
PowerPC MPC5200B microcontroller. Its universal design enables its
insertion in a wide range of embedded applications. All controller
signals and ports extend from the controller to high-density
(0.635 mm) Molex pin header connectors aligning two sides of the
board, allowing it to be plugged like a "big chip" into a target
application.