Germany
PHYTEC Messtechnik GmbH
D-55129 Mainz
t +49 6131 9221-32
f +49 6131 9221-33
www.phytec.de
www.phytec.eu
USA
PHYTEC America LLC
Bainbridge Island, WA 98110
t +1 206 780 9047
f +1 206 780 9135
www.phytec.com
France
PHYTEC France SARL
F-72140 Sillé le Guillaume
t +33 2 43 29 22 33
f +33 2 43 29 22 34
www.phytec.fr
India
PHYTEC Embedded Pvt. Ltd.
Bangalore
560102
t +91 80 40867046
www.phytec.in
L-1000e
.
A1
China
PHYTEC Information Technology Co. Ltd.
Nanshan District, Shenzhen
518026 PRC
t +86 755 6180 2110
www.phytec.cn
phyCORE
®
-i.MX 8M
Azure Edge / AI Kit
Get your Edge Computing / AI Kit powered up and connected
in just a few simple steps.
PREPARING THE HARDWARE
1.
Connect the following components and cables (found in your kit):
• Connect camera assembly via ribbon cable to CSI-1 (
X10
) (
Figure A
)
• Screw camera lens into camera assembly (
Figure B
)
• Connect the Ethernet cable to your preferred Ethernet source and X1
• Insert the SD card into the SD card slot. Ensure the boot jumper is set to SD Card (
Figure C
).
2.
Connect a USB cable to your host PC and the Debug FTDI (
X30
)
3.
Connect display adapter and display to board
(see enclosed documentation LAN-085e.A0 Connecting the Touchscreen to i.MX 8M)
4.
Connect the +24 V power adapter (SV042) to power up the kit and begin the booting process.
Please note that all cable and devices need to be connected for the demo to function properly.
Kit
Contents
phyBOARD-Polaris with phyCORE-i.MX 8M
USB-A to USB-B Micro Cable
Power Adapter 24 V
PB-02820-001.A1
(WK345)
(SV055)
Camera Ribbon Cable (WK114)
Color Camera with Sensor Board
Ethernet Cable
10“ LVDS Display Kit
(VM-016-COL-M-M12.A1)
(WK114)
(KPEB-AV-10-100.A0)
Figure C:
SD Boot Mode
Quick
Start
Guide
Quick
Start
Guide
phyBOARD
®
-Polaris
with phyCORE
®
-i.MX 8M
FRONT
BACK
Figure A:
Connecting the Camera Assembly
Figure B:
Camera Assembly
1
2
3
Camera
Assembly
(Backside)