manualshive.com logo in svg

Phytec phyCORE-ADuC812, Quick Start Instructions

Share
Download
Phytec phyCORE-ADuC812 Quick Start Instructions Download Page 63

Debugging

                                                                                                                                                

                                                                                                                                                

©  PHYTEC Meßtechnik GmbH 2002     L-462e_2

59

4.3

 

Preparing the Debugger

According to the Project|Options for Target ‘phyCORE-ADuC812'
configuration, µVision2 will load the application program and run the
startup code.

•

 

Open the Project|Options for Target ‘phyCORE-ADuC812’ menu
and select the Debug tabsheet.

•

 

Enable the checkboxes Use: Keil Monitor-51 Driver and Load
Application at Startup. Disable the checkbox Go till main().

•

 

Click on the Settings button in the upper right-hand corner of the
Debug tabsheet.

Summary of Contents for phyCORE-ADuC812























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands