Contents
PHYTEC Messtechnik GmbH 2018 L-823e_2
iii
List of Tables
Table 1:
Abbreviations and Acronyms used in this Manual ................................................v
Table 2:
phyBOARD-Regor Connectors and Pin Headers .................................................. 4
Table 3:
phyBOARD-Regor LEDs Descriptions ................................................................ 6
Table 3:
phyBOARD-Regor LEDs Descritption (continued) ............................................... 7
Table 4:
phyBOARD-Regor Switches Description ............................................................ 8
Table 5:
phyBOARD-Regor Jumper Description ............................................................. 9
Table 6:
Pin Assignment of the 5 position Phoenix Contact MINI COMBICON Base Strip X1 .... 11
Table 7:
Connectors and Signal Levels of the UART Interfaces ......................................... 13
Table 8:
Pin Assignment of the RS-232 Interface at Connector X5 .................................... 14
Table 9:
Pin Assignment of the RS-485 Interface at Connector X3 .................................... 15
Table 10: Pin Assignment of CAN Connector X3 .............................................................. 16
Table 11:
Digital input switching levels for GPIO 1-4....................................................... 20
Table 13: Pin Assignment of CardEdge Connector X7....................................................... 22
Table 14:
Boot Switch Configuration for S4................................................................... 23
Table 15:
Pin Assignment of PHYTEC Expansion Connector X6 ........................................... 25
Table 16:
I
2
C Addresses in Use ................................................................................... 27
Table 17:
Power ratings of the phyBOARD-Regor ........................................................... 29
Table 18:
Product Temperature Grades ........................................................................ 30
