Phytec kitCON-161CS, Hardware Manual

Page: 5 / 62

Preface

PHYTEC Meßtechnik GmbH 1999 L-356e_2
Preface
This kitCON-161CS/JC/JI User’s Manual describes the board’s design
and functions. Precise specifications for the C161 microcontroller can
be found in the enclosed microcontroller Data-Sheet/User’s Manual. If
software is included please also refer to additional documentation for
this software.
In this hardware manual and in the attached schematics, low active
signals are denoted by a "/" in front of the signal name (i.e.: /RD). A
"0" indicates a logic-zero or low-level signal, while a "1" represents a
logic-one or high-level signal.
Declaration regarding EMV-Conformity of the
PHYTEC kitCON-161CS/JC/JI
PHYTEC kitCON Single Board Computers (henceforth „products“)
are designed for installation in electrical appliances or as dedicated
Evaluation Boards (i.e.: for use as a test and prototype platform for
hardware/software development) in laboratory environments.
PHYTEC products must be operated within protective, grounded
circuitry. Moreover, PHYTEC products should not be operated
without protection circuitry if connections to the products’ pin header
rows are longer than 3 m.
Implementation of PHYTEC products into target devices, as well as
user modifications and extensions of PHYTEC products, is subject to
renewed establishment of conformity to, and certification of, EMV-
Statutes. Only after doing so the devices are allowed to be put into
circulation.
PHYTEC products fulfill the norms of the EMVG-statute only in
accordance to the descriptions and rules of usage indicated in this
hardware manual (particularly in respect to the pin header row
connectors, power connector and serial interface to a host-PC).