PCM-065/phyCORE-i.MX8X System on Module
L-864e.A1
© PHYTEC America LLC, 2021
8
Preface
Members of PHYTEC's phyCORE
®
product family can be populated with different processors and offer various
functions and configurations. PHYTEC supports a variety of Arm-based and other microprocessors in two ways.
1. As the basis for PHYTEC development kits and Single Board Computers, which serves as a reference and
evaluation platform.
2. As insert-ready, fully functional phyCORE
®
OEM System on Modules (SOMs) and phyBOARD Single
Board Computers
(SBCs), which can be incorporated directly into the user’s hardware design.
Implementing an OEM-able SOM subassembly as the "core" of your embedded design allows for increased
focus on hardware peripherals and firmware without expending resources to "re-invent" microprocessor circuitry.
Production-ready Board Support Packages (BSPs) and Design Services for our hardware will further reduce
development time, risk and allows for increased focus on product expertise. Take advantage of PHYTEC
products to shorten time-to-market, reduce development costs, and avoid substantial design issues and risks.
With this new innovative full system solution, new ideas can be brought to market in the most timely and cost-
efficient manner.
https://phytec.com/design-services/
Declaration of Electromagnetic Conformity of the
PHYTEC phyCORE-i.MX8X System On Module
PHYTEC System on Modules (SOM) and Single Board Computers (SBC), henceforth collectively referred to as
“products”, are designed as subcomponents for integration in electrical devices.
Combined with PHYTEC Carrier Boards, PHYTEC SOMs can be used as dedicated Evaluation Boards (i.e.: for
use as a test and prototype platform for hardware/software development) in laboratory environments.
CAUTION:
PHYTEC products lacking protective enclosures are subject to damage by ESD and, hence, may
only be unpacked, handled or operated in environments in which sufficient precautionary measures
have been taken in respect to ESD-dangers. It is also necessary that only appropriately trained
personnel (such as electricians, technicians, electronic manufacturing personnel and engineers)
handle and/or operate these products.
PHYTEC products fulfill the rules and regulations
of the European Union’s Directive for Electromagnetic
Conformity and the Federal Communications Commission Title 47 CFR Part 15 Subpart B only in accordance
with the descriptions and rules of usage indicated in this hardware manual, particularly in respect to the external
SOM connector, power interfaces and interfaces to host systems for programming.
NOTE:
Integration of PHYTEC products into target devices, as well as user modifications and extensions of
PHYTEC products, is subject to renewed establishment of conformity to, and certification of,
Electromagnetic Directives. Users should ensure conformance following any modifications to the
products as well as implementation of the products into target systems.
