PCM-065/phyCORE-i.MX8X System on Module
L-864e.A1
© PHYTEC America LLC, 2021
14
2
SOM Features
The phyCORE-i.MX8X offers the following features:
•
Insert-ready, sub-miniature (52 mm x 42 mm) System on Module (SOM) subassembly in low EMI design,
achieved through advanced SMD technology
•
Populated with the NXP Semiconductors i.MX8X microprocessor (21 x 21 mm, 0.8 mm pitch S-PBGA)
•
Single supply voltage of 3.3V with on-board power management
•
Improved interference safety achieved through multi-layer PCB technology and dedicated ground pins
•
1 x PMIC
•
Up to 2GB LPDDR4 RAM
•
Up to 8GB on-board eMMC
•
1x Octal SPI (FlexSPI) for fast boot from SPI NOR flash (or 2x QSPI interfaces)
•
1x SD 3.0 card
•
2x 32KB I
2
C EEPROM
•
2x MIPI or LVDS display
•
1x 18-bit parallel LCD display
•
1x 16-bit parallel CSI camera
•
1x MIPI-CSI camera with 4-lanes
•
1x Independent 1-lane PCIe Gen3 with L1 substate support
•
2x USB OTG (2.0)
•
1x SuperSpeed USB3.0 dual-role port
•
2x 10/100/1000 Mbit Ethernet (1 provided via on-board PHY)
•
3x FlexCAN
•
1x Media Local Bus
•
5x UART
•
1x ESAI (Enhanced Serial Audio Interface)
•
4x SAI (Serial Audio Interface)
•
9x I
2
C
•
2x ASRC (Asynchronous Sample Rate Converter)
•
1x SPDIF
•
1x JTAG debug port
•
1x 6-channel ADC converter
•
4x SPI
•
1x 4x4 KPP (Key Pad Port)
•
1x MQS (Medium Quality Sound)
•
3.3V/1.8V GPIOs
•
4x PWM
•
1x Security Module
NOTE:
Some of the features listed are not available simultaneously due to the muxing options of the various
processor pins. Refer to the
i.MX8X Datasheet and Processor Reference Manual
information on available muxing options.
